JKmatic Digital Stager Controller don Tsarin Tace Faifai/Tsarin Ruwa

Siffofin samfur:
1. An tsara mai sarrafa JKA5.0 na musamman don amfani tare da tsarin tace diski.
2. Yana da zane-zane na PID, mai sauƙin aiki mai sauƙi, share saitunan ma'auni, kuma baya buƙatar mai aiki ya ƙware hadaddun yarukan shirye-shirye.
3. A lokuta na musamman, ana iya tilasta shi da hannu don fara farfadowa.
4. Mai sarrafawa yana da aikin ƙararrawa wanda ke fitar da siginar ƙararrawa lokacin da kayan aiki ba su yi aiki ba ko kuma ba za a iya tsaftace su sosai ba, yana sauƙaƙa don lura da yanayin aikin tacewa.
5. Yana da firikwensin firikwensin da aka gina tare da babban daidaito da aminci, yana kawar da buƙatar canza canjin matsa lamba na waje.
6. Yana ɗaukar ƙirar tsaga, tare da kewayawa mai sarrafawa da matakan da ke da ƙirar buɗewa don babban aikin aminci.
7. Yana goyan bayan sadarwar PPI kuma yana iya sadarwa tare da kwamfutoci na sama.
8. Yana da ƙimar hana ruwa IP65.
Shigar da Mai Gudanarwa:
1. Ana buƙatar tushen wutar lantarki 230V, 50HZ ko 110VAC 60HZ kusa da mai sarrafawa.
2. Ana buƙatar shigar da mai sarrafawa a kan sashi ko majalisar kulawa.
3. Maɓallin mai sarrafawa yana buƙatar a haɗa shi da ƙarfi kuma a kiyaye shi daga girgiza.
4. Dole ne a bar sararin samaniya na 200mm a kowane gefen mai sarrafawa don dalilai na kulawa.
5. Wurin da ba kasa da 500mm yana buƙatar a bar shi a ƙarƙashin akwatin kula da matakan mataki don dalilai na shigarwa na bututu.
6. Matsakaicin zafi na yanayi shine 75% RH, ba tare da ɗigon ruwa ba, kuma zafin yanayi yakamata ya kasance tsakanin 32 ℉ (0 ℃) da 140 ℉ (60 ℃).
7. Akwatin mai sarrafawa yana da girman waje na 300x230x160, yayin da akwatin mataki yana da girman waje na 160x160x120.